Feedback

SECOCQ7-3.5

SECOCQ7-3.5

Qseven rel. 2.0 Compliant Carrier Board on 3.5” Form factor

Key Features

  • This carrier board can be used with any Qseven Rel. 2.0 compliant module without incompatibilities and/or loss of functionalities.
  • The board has been specifically designed for taking advantage of all possible features that can be offered by x86 and/or ARM architectures on Qseven modules.
  • SECOCQ7-3.5 has been developed most of all as a development board to explore the possibilities offered by Qseven modules, but it could also be a good solution for low volumes production for companies that do not want or need to develop customised carrier board.
  • Available for:
  • μQ7-i.MX6
  • QuadMo747-GSeries
  • QuadMo747-X/i.MX6
  • QuadMo747-X/T30
  • μQ7-T30
  • Q7-BT
  • Q7-GX
  • QuadMo747-x2000
  • μQ7-BT-J
  • μQ7-i.MX6-J
  • Q7-BTm
  • Specification

      Storage

    • 1 x SATA with HDD Power connector
    • 1 x mSATA Slot
    • microSD Slot on combo microSD + SIM connector
    • I/O

    • MiniPCI-e slot Full/Half size, combined with SIM card slot
    • 1 x USB 3.0 port Type-A socket
    • 2 x USB 2.0 ports on double Type-A socket
    • 2 x USB 2.0 ports on internal pin header
    • 1 x USB 2.0 OTG ports on micro-AB socket (USB Port shared with miniPCI-e slot)
    • Optional Debug USB port on mini-B Socket
    • 4-wires RS-232/RS-422/RS-485 configurable serial port on DB9 male connector
    • Optional 2 x RS-232 Full-modem serial ports on internal header (needs LPC interface on Qseven module)
    • CAN interface on PCB terminal block
    • SPI internal pin header
    • LPC Bus internal pin header
    • SM Bus/I2O GPIO expander, makes available 16 x GPIOs on internal pin header
    • Front Panel Header
    • 1 x 28 pin connector for additional features (I2C, ACPI signals, SM Bus, Watch Dog, Thermal Management)
    • 3 pin header, with fan speed control, +12VDC

    Product Resources